Filter
Top Products
setup screen
78_ setup screen
PTZ setup
You can change the direction of lens and activate the zoom.
1. Select the <Basic (
)> tab from
Setup menu.
2. Click <PTZ setup>.
3. Click [▼ Show].
4. Click the cursor [
] on the screen
moving pad to control movement of the
screen.
• Move screen: Scroll the cursor in the
direction desired.
• Control screen movement rate: The
further away the cursor is from the
center, the faster it moves on the
screen.
5. Control zoom movement.
• Zoom In: Move up the bar in the right
of the UI, or press the [
] button.
The farther the bar is from the center,
the faster the screen expands.
• Zoom Out: Move down the bar in the
right of the UI, or press the [
]
button. The farther the bar is from
the center, the faster the screen reduces in size.
6. Adjust the focus.
• Manual focus (
/ ) : The user sets the focus.
• Auto focus (
) : The system sets the focus automatically.
J
`
When performing the sequence action at a high or low temperature, the system may respond
slower than the set rate for accurate sequence action.