Samsung SNP-5430H Security Camera User Manual


 
setup screen
92_ setup screen
`
For the best WDR performance, it is recommended to set the Iris mode to <Auto>.
`
Since the auto focus operation can be repeated depending on the lighting condition if user
backlight compensation is used, it is recommended to use the focusing mode of <One Shot AF>
or <Manual>.
`
SSDR cannot be used in WDR mode.
Exposure Setup
You can adjust the exposure level of the camera.
1. Select <Exposure>.
2. Select each item and set it properly.
Brightness : Adjust the screen
brightness.
Minimum shutter : Set the min.
shutter speed manually.
Maximum shutter : Set the max.
shutter speed manually.
Anti flicker : Select this feature if
you encounter a flickering screen due to a frequency mismatch with the ambient
lighting.
SSNR : Specify whether you want to remove the noises in the video.
`
If the AGC mode is set to <Off> or <Manual>, you cannot use SSNR.
SSNR level : Set the level of SSNR.
Iris : You can set the camera iris to Auto or Manual to your preference.
- Auto : Automatically sets the iris adaptively to the ambient lighting and shutter
speed.
- Manual : Iris F-No is set manually.
Iris F-No : If the iris mode is set to Manual, specify the F number of the iris.
`
As F-No increases, the iris decreases, so the screen is darkened, and as F-No decreases, the
screen is brightened.
AGC : Select AGC Control mode.
Adjust the gain value of the video (that, in particular, was recorded at a low
contrast scene and had a lower brightness level than normal) to control the video
brightness.
`
If the AGC mode is set to <Off> or <Manual>, you cannot use SSNR and cannot select the
<Auto> mode for the Date/Night mode setting.
AGC level : If the AGC mode is set to Manual, specify one between 0dB and
42dB.