Filter
Top Products
setup screen
80_ setup screen
To configure the detailed settings for the preset
1. Select the number of preset that you
want to configure.
2. Click the <Preset edit setup> tab.
• Camera setup : You can change the
camera setting to the environment of
the selected preset.
Refer to “Camera setup” for how to
set the camera. (page 88)
• Special : In the <After action>,
you can select auto tracing/auto
execution/video analysis operation
after the preset operation. (This
setting does not apply in the swing
function.)
- Auto tracking : Auto tracing is run
for the set tracing time.
- Auto run : The sequence setting
for auto execution is performed. If
you turn off the function or if there
is no auto-executing operation,
the preset operation status is
maintained. (This setting is not
applied if preset is run with a group
or tour function.)
- Video analysis : MD/VA operation is
run.
• MD / VA : You can set the system
to generate an event signal when
a movement is detected in the preset, or an intelligent video analysis event is
detected.
For more details, refer to “MD / VA”. (Page 123)
3. When done, click [Apply (
)].
J
`
After saving the preset setting, make sure to select <Sequence Setup> or run the preset. If
the operation is not performed, the system may run a wrong operation, such as an unintended
change of preset setting.
`
While setting preset edit, you cannot use the functions, such as preset setting, home position
setting and move to the home position.