Filter
Top Products
English _83
● SETUP SCREEN
To configure the tour settings
The tour function enables you to call groups of your presets in sequence.
1. Select <Tour> in <Sequence setup>.
The menu screen will switch to the tour
setting screen.
2. Configure the tour settings in detail.
• Group No. : Select a group number.
• Dwell time : Specify a waiting time
before a new group is called.
3. Press the [
] button.
Entered in the bottom list.
4. Press the [
] button.
Saved in the bottom list.
5. Press the [
] button.
It performs the tour operation.
6. Press the [
] button.
The running tour will be stop.
7. Press the [
] button.
Selected tour data will be deleted.
To set the tracing function
Tracking remembers the trace of movements instructed using the direction button and
reproduces it for your reference.
1. Select <Trace & Auto Run> in
<Sequence setup>.
The menu screen will switch to the
PTZ tracking and Auto operation menu
screen.
2. Select a tracking number.
The operation will be saved with display
of the memory usage. The saving time differs, depending on the level of the PTZ
operation.
If memory is filled to 100% or the recording end configuration is not completed in
2 minutes from the beginning of saving, it will be automatically terminated.