Filter
Top Products
e-27e-26
2-4) SET- KEY
Alarm function and loss function can be cancelled
while the alarm or loss is working.
2-5) QUAD/PAGE- KEY
Allows users to display QUAD A or QUAD B at
QUAD DISPLAY MODE.
•
QUAD A: QUAD DISPLAY MODE from Camera
1 to Camera 4
•
QUAD B: QUAD DISPLAY MODE from Camera
5 to Camera 8
2-6) LIVE/VCR- KEY
Allows users to switch LIVE MODE to VCR MODE
or VCR MODE to LIVE MODE. If VCR MODE is
cancelled, the QUAD picture of LIVE MODE will be
automatically displayed. In case any event happens at
VCR MODE such as LOSS or ALARM, the MODE
will be automatically switched to LIVE MODE, and
the pre-set operation for the event will be carried out.
If there is no external input at VCR MODE, the ICON
“ ” will be displayed.
•
LIVE MODE: Image and voice signal from
CAMERA is displayed.
•
VCR MODE: External image and voice signal
from VCR terminal from the rear of the monitor is
displayed.
Chapter 2: REMOTE CONTROL
Function and Using Method
The Remote Controller(REMOCON) is contained in the 17" TFT-LCD
Monitor (SMT-170).
2-1) TALK KEY
TALK KEY allows users to transmit voice signal to
intended camera by inputting voice with built-in MIC
in the front of the monitor. For this function, select a
target camera with the
œœ
ENTER
√√
SWITCH on the
FRONT PANEL, if a voice signal is generated through
the MIC with the TALK KEY pressed, the signal will
be transmitted to the camera.
2-2) VOL+/VOL- KEY
Allows users to decrease or increase voice signal
generated from the monitor.
VOL+ : Increase sound volume from the monitor.
VOL- : Decrease sound volume from the monitor.
2-3) POWER SAVE- KEY
Allows users to set POWER SAVE MODE of monitor.
PICTURE screen is off when the POWER
SAVE KEY is pressed, and the ON/OFF status of the
monitor can be judged through LED ON/OFF
status. Users can exit from POWER SAVE MODE by
pressing POWER SAVE BUTTON again under
picture “OFF” status. POWER SAVE MODE is
automatically cancelled and picture is “ON” when an
event such as an alarm or loss at POWER SAVE
MODE occurs.
00403A SSC-17TQ_ENG 10/9/03 11:30 AM Page e-26