Filter
Top Products
e-39e-38
4-3) AUTO SEQUENTIAL DISPLAY MODE
Pressing on the SEQUENCE KEY on the front allows screen to automatically switch to SINGLE
MODE full screen or QUAD MODE. (‘no-signal’ channels will be skipped while single screen is
auto-switching.)
If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds and the SEQUENCE KEY is
pressed at this time, the operation will be carried out as follows.
➯
➯
➯
Press SEQUENCE KEY
when CAM2 is displayed
at full screen
Automatic sequential switching to CAM3
Automatic sequential switching to CAM4Automatic sequential switching to CAM5
In 3 seconds
In 3 seconds
In 3 seconds
* QUAD MODE SEQUENCE DISPLAY
* SINGLE MODE SEQUENCE DISPLAY
➯➯
08/01/03 12:30:00
CAM 2
08/01/03 12:30:03
CAM 3
08/01/03 12:30:09
CAM 5
08/01/03 12:30:06
CAM4
08/01/03 12:30:00
QUAD-A
CAM3 CAM4
CAM1 CAM2
08/01/03 12:30:03
QUAD-B
CAM7 CAM8
CAM5 CAM6
08/01/03 12:30:06
QUAD-A
CAM3 CAM4
CAM1 CAM2
4-2) QUAD MODE DISPLAY
Users can switch SINGLE DISPLAY MODE and SEQUENTIAL DISPLAY MODE to QUAD
DISPLAY MODE, or QUAD A (QUAD B) to QUAD B (QUAD A), or PIP MODE to QUAD MODE,
press the QUAD/PAGE KEY.
* At QUAD MODE display from SINGLE MODE or SEQUENCE MODE,
CAM3 DISPLAY QUAD MODE DISPLAY
of QUAD A
➯
➯
CAM 2
PIP MODE DISPLAY
➯
Press
QUAD/Page
KEY
QUAD MODE DISPLAY
of QUAD A
QUAD MODE DISPLAY of
QUAD B
QUAD MODE DISPLAY of
QUAD A
Press
QUAD/Page
KEY
Press
QUAD/Page
KEY
* At QUAD B(QUAD A) display from QUAD A(QUAD B),
* At QUAD B(QUAD A) display from PIP MODE,
08/01/03 12:30:00
QUAD-A
CAM3 CAM4
08/01/03 12:30:00
CAM1 CAM2
08/01/03 12:30:00
QUAD-B
CAM7 CAM8
CAM5 CAM6
08/01/03 12:30:00
QUAD-A
08/01/03 12:30:00
PIP-A
CAM3 CAM4
CAM1 CAM2
CAM 3
CAM 1
08/01/03 12:30:00
QUAD-A
CAM3 CAM4
CAM1 CAM2
00403A SSC-17TQ_ENG 10/9/03 11:30 AM Page e-38