e-9
1-3) CAMERA composition and installation method
1) Standard Camera composition (SOD14C)
a. Lens
It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide
area.
b. Microphone
Capable of picking up all sound in the vicinity of the camera location and transmitting to
the monitor.
c. Camera fitting groove
Enables the camera to be fixed onto the bracket. You may install it either above or below
the camera if necessary.
d. 6-pin modular jack
Used to connect the camera to the monitor.
e. SENSOR jack
Used to connect the sensor to the camera.
PIN NUMBER
!
@
#
$
%
^
SPEC
SPEAKER(HOT)
VIDEO_OUT
GND
SPEAKER(COLD)
AUDIO_OUT/ALARM_OUT
12V DC
e-8
• Check whether all the following devices and accessories are included with the main system.
ITEM
LCD MONITOR
DIGITAL DUAL QUAD
STANDARD CAMERA
PIR CAMERA
CAMERA BRACKET
CAMERA CABLE
CAMERA CABLE
INSTALLATION MANUAL
POWER CORD
VCR CABLE
SENSOR CONNECTOR
RACK MOUNT
ADAPTERS
ACCESSORY CABLE
MODEL
SMT-170
SOQ-080N
SOD14C
SMM-
PIRCAM
SBR-110
MCB-60
MCB-100
SSC-17TQ
-
-
-
-
RJ-45 CABLE
DESCRIPTION
17" TFT-LCD MONITOR
DIGITAL DUAL COLOR
QUAD SWITCHER
NORMAL TYPE CAMERA
PIR CAMERA
STANDARD TYPE
CAMERA BRACKET
6PIN SHIELD CABLE
6PIN SHIELD CABLE
-
CBF-POWER CORD
BNC DIN CABLE ASSY
TERMINAL-BLOCK
BRACKET-GUIDE
8PIN SHIELD CABLE
Q’ty
1
1
2
1
2
2
1
1
1
1
2
2
1
NOTE
-
-
-
Tapping Screw 4
(HUD 5=2, BH M3 x 30=2)
Tapping Screw 6
(M4 x L15)
60ft(1ft=0.3048m)
100ft(1ft=0.3048m)
-
-
5P
2P
Screw 8
(M4 x 20=4, M3 x 6=4)
60ft(1ft=0.3048m)
00403A SSC-17TQ_ENG 10/9/03 11:30 AM Page e-8