Filter
Top Products
ALARM SETTING Menu 4
When an alarm trigger is received from sensors such as a door bell, movement sensor, etc. you can set the display mode and the
recording mode for the pictures from the concerned camera.
(ALARM SET)
Changing the Settings
1 Press the MENU button 4 times to display the (ALARM
SET) menu.
2 Press the l button to highlight the setting to modify.
3 Using the + (or –) button, select the desired setting,
then press the l button.
•
Repeat step 3, until all the settings are as desired.
4
☞
Press the MENU button to go to the next menu
screen, or
☞
Press the EXIT button to exit the menu display.
ALARM SET menu
BUZZER
ON: A buzzer will be heard when an alarm trigger is received.
(Default setting)
OFF: The buzzer will not be heard.
DURATION
The alarm duration can be set to: 1, 2, 3, 4, 5, 10 (Default
setting), 30 seconds, CC, NC
CC: The alarm will go on for as long as the alarm signal is
received (minimum 1 second).
NC: The alarm will continue until canceled.
RETRIGGER
To set if an alarm is received while the unit is already in alarm
mode.
OFF: The unit will not receive another alarm, while one is
already being received. (Default setting)
ON: During alarm mode, other alarm triggers will be received
and the alarm duration will be extended.
DATA
The camera number, date, time, type of the alarm can be
recorded. (To view the recorded alarm data, refer to “ALARM
DATA DISPLAY” on page 26.)
ON: The alarm data is recorded. (Default setting)
OFF: The alarm data is not recorded.
VIDEO OUT (A)
FULL: If an alarm trigger is received while in quad screen, the
picture from the camera corresponding to the alarm input
will be displayed full screen. (Default setting)
DOUBLE ALARM
This item is only displayed and can only be set if “VIDEO
OUT” above is set to “FULL”.
SWITCH: The picture from each concerned camera will be
displayed sequentially at 1 second interval.
(Default setting)
FIRST: The picture from the first alarm received only is displayed.
LAST: The picture from the last alarm received is displayed.
VIDEO OUT (B)
QUAD: If an alarm trigger is received while in full screen, the
display mode will switch to quad screen.
STILL
ON: The image from the camera corresponding to the
alarm trigger will be frozen.
OFF: The image will not be frozen. (Default setting)
ZOOM
ON: The image from the camera corresponding to the
alarm trigger will be zoomed in.
OFF: The image will not be zoomed in. (Default setting)
VIDEO OUT (C)
NC: The display mode will remain unchanged when an alarm
trigger is received.
LIVEQUAD
1, 2 3
(ALARM SET)
BUZZER ON
DURATION 10 S
RETRIGGER OFF
DATA ON
VIDEO OUT FULL
DOUBLE ALARM SWITCH
(ALARM SET)
BUZZER ON
DURATION 10 S
RETRIGGER OFF
DATA ON
VIDEO OUT FULL
DOUBLE ALARM SWITCH
LIVE
(ALARM SET)
BUZZER ON
DURATION 10 S
RETRIGGER ON
DATA ON
VIDEO OUT FULL
DOUBLE ALARM SWITCH
(ALARM SET)
BUZZER ON
DURATION 10 S
RETRIGGER ON
DATA ON
VIDEO OUT NC
(ALARM SET)
BUZZER ON
DURATION 10 S
RETRIGGER ON
DATA ON
VIDEO OUT QUAD
STILL OFF
ZOOM OFF
L8QR5/XE (VQC-801P, VQM-801P GB) 1999. 12. 2
English 19