Sanyo VQM-801P Security Camera User Manual


 
ALARM DATA
DISPLAY Menu 9
According to the settings entered in the (ALARM SET), (VIDEO
SENSOR SET) and (VIDEO LOSS SET) menus, information
about the alarms (alarm data) can be recorded. Up to 100 alarm
data entries can be displayed on-screen (on up to 13 screens).
(ALARM DATA)
Displaying the Alarm Data
1 Press the MENU button 9 times to display the (ALARM
DATA) menu.
The first screen (1/13) of alarm data entries is displayed.
2 To display the next screen of alarm data entries, press
the NEXT button.
3
Press the EXIT button to exit the menu display, or
Press the MENU button to return to the normal
picture, then press the MENU button once more to
display the menu display.
The codes in the ITEM column indicate the type of alarm
data.
E: External alarm trigger (see page 27)
V: Video loss (see page 25, 27)
S: Video sensor alarms (see page 20, 27)
NOTE:
When the number of recorded alarm data entries reaches
100, the oldest ones are erased as new ones are recorded.
The alarm data screens are only displayed when alarm data
entries are recorded.
(ALARM DATA) 1/13
CAM DATE TIME ITEM
1 4 08-22 08:48 E
2 2 08-21 08:51 S
3 4 05-04 16:22 E
4 3 05-04 07:45 V
5 1 04-30 14:37 E
6 1 04-21 18:26 V
7 2 04-12 05:31 E
8 4 04-12 12:51 S
(ALARM DATA) 2/13
CAM DATE TIME ITEM
9 4 03-29 17:40 E
10 2 03-26 08:49 V
11 4 03-13 09:25 E
12 3 03-05 08:15 S
13 1 02-11 15:18 E
14 1 02-29 12:30 V
15 2 02-21 08:21 S
16 4 01-15 11:34 E
1
ZOOM
NEXT
2
MENU
SETTING UP THE VCR
SIGNAL OUTPUT (SW IN)
AUTOMATIC SWITCHING
SPEED
1 Connect the unit SW IN terminal to the VCR SW OUT
terminal (see page 5).
2 Set the VCR recording speed.
The settings entered for the SEQ. TIMER in menu 7 (MONITOR
SET) will be ignored, and the full screen image and quad screen
(A and B) switching speeds will be the speed set by the VCR.
NOTE:
Even if the screens switching speed is set to a very quick
timing, the minimum switching speed delay will be 1 second.
Even when the switching timing is set using the SW IN
terminal signal, the minimum switching speed delay will be 1
second (see page 24).
L8QR5/XE (VQC-801P, VQM-801P GB) 1999. 12. 2
26 English