Filter
Top Products
44
Maintenance
How to Use the
Online Manual
Printer Properties Print
Print Status
Window
Maintenance TroubleshootingSharing Printer
Aligning the Print Head (part 2)
2
22
2
Select a pattern sample for "Pattern B".
Look at the chart B on your test chart. Select the number
under the pattern sample, in which is located the closest
to the center of the two horizontally parallel lines.
3
33
3
Select pattern samples for "Pattern C" and
"Pattern D" respectively.
Look at the chart C and D on your test chart. Select the
numbers under the pattern samples, which have the
straightest lines.
6
66
6
Click the "OK" button in the "Align print head"
dialog box.
The print head will align itself.
-8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8
Example:
-6 +8
-6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6
-6
Example:
+1
Straight lineCracked line
! If you cannot find any satisfactory pattern sample for
each of "Pattern A" to "Pattern D" settings, select the
best ones among the printed pattern samples, and
then go back to step 3.
! The printer cannot perform other operations while
aligning the print head.