Filter
Top Products
16
Preparation
JUN.
12 00AM
:
2 2002.
SETT ING
JUN.
10 00AM
:
2 2002.
SETT ING
JUN.
10 30AM
:
2 2002.
SETT ING
12H
24H
DISPLAY
DYLT SAVE
AREA
SETTING
12H 24H
CLOCK SET
24H
21H24H
DISPLAY
DYLT SAVE
AREA
SETTING
12H 24H
OFF
DATE
DATE
+
TIME
CLOCK SET
DISPLAY
DATE
+
TIME
SP
50
min
2002.2
03MA:01
JUN.
9 Press d or y to select “2002” (year),
and then press r.
10 Press d or y to select “10 AM”
(hour), and then press r.
11 Press d or y to select “30” (minute),
and then press e.
• The internal clock now starts operating.
12 Press the MENU/DISPLAY button to
turn off the menu screen.
Changing to the 24-hour Time Mode
1 After performing step 11 above, press
d or y (1) to select “12H/24H”, and
then press r (2).
2 Press d or y to select “24H”, and
then press e.
3 Press the MENU/DISPLAY button to
turn off the menu screen.
Displaying the Date and Time
of Recording
Follow the procedure below to display the date,
or both the date and time, of recording on the
screen. You can display the date and time
during both recording and playback.
• The example screens for this feature are for
TAPE-CAMERA mode.
1 Hold down the Lock button and set the
Power switch to CAMERA or VCR.
2 Press the MENU/DISPLAY button until
the menu screen appears.
3 Select P, then press r on the
Operation button. Select “DISPLAY” (1),
then press r (2).
4 Press d or y to select “DATE” or
“DATEHTIME”, and then press e.
5 Press the MENU/DISPLAY button to
turn off the menu screen.
• The date (or the date and time) is
displayed.
Notes:
• Before recording, make sure that the date and
time have been correctly set. If they have not
been set, the display will be left blank when
playing back the recording. (The display will also
be left blank for unrecorded or damaged
portions of the tape.)
• In TAPE-VCR or CARD-VCR mode, the current
date and time are displayed when the tape or
SmartMedia card is not being played back.
Notes:
• The date and time, once set, are internally
recorded even when not displayed on the
screen.
• The menu screen automatically turns off if no
settings are made within 5 minutes.