Sharp VL-WD450U Camcorder User Manual


 
39
Useful Features
Camera Recording
Useful Features
Still Recording on Tape
You can record still images of subjects with
normal sound on a tape by selecting one of two
still recording modes.
Type of Still Recording modes
SNAP: A still picture is recorded for 6 seconds.
STILL: A continuous still image is recorded.
2 Press the MENU/DISPLAY button until
the menu screen appears.
3 Select Y, then press r on the
Operation button. Select SNAP EFF.
(1), then press r (2).
4 Press d or y to select OFF, then
press e.
OFF
PHOTO SNAP
PHOTO
FRAMES
P
-
IN
-
P
SHOT
DGTL ZOOM
TAPE SPEED
16 9 9
FRAMES
16
:
CAMERA SET
EFF.SNAP
OFFEFF.SNAP
PHOTO SNAP SNAP
DGTL ZOOM
TAPE SPEED
16 9:
STILL
CAMERA SET
EFF.SNAP
PHOTO SNAP STILL
Selecting Still Recording Mode
1 Set the camcorder to TAPE-CAMERA
mode.
5 Press y (1) to select PHOTO
SNAP, then press r (2).
6 Press d or y to select the desired
still recording mode, then press e.
7 Press the MENU/DISPLAY button to
turn off the menu screen.
Using Still Recording
1 Set the camcorder to TAPE-CAMERA
mode.
2 In Recording Standby
mode, press the STILL
button.
A still image of the subject
is displayed.
3 Press the REC START/STOP
button.
The still image of the subject
will be recorded.
In SNAP mode, the camcorder returns to
Recording Standby mode after recording
a still image for 6 seconds.
To pause recording
Press the REC START/STOP button.
To cancel the still image
In SNAP mode, press the STILL button while
the camcorder is in Recording Standby
mode.
In STILL mode, press the STILL button.
Notes:
Still Recording can also be used during
recording by pressing the STILL button.
The picture quality in Still Recording mode will
be slightly lower than normal pictures.