Sharp VL-WD450U Camcorder User Manual


 
18
Preparation
Using the Viewfinder
You can record the subject using the electronic
LCD viewfinder. You can also watch playback
through the viewfinder.
Viewfinder
Power switch
1 Lift up the viewfinder.
Note:
You can raise the viewfinder to aim the
camcorder better depending on your
position.
Lock button
Closing the viewfinder
Lower the viewfinder.
Cautions:
Do not use excessive force when moving the
viewfinder.
Do not pick up the camcorder by the viewfinder.
Notes:
The viewfinder automatically turns off when the
LCD monitor is opened. When the vertical
rotation of the monitor is between 135° and 180°,
however, the viewfinder is on and the subject is
displayed both in the viewfinder and on the
monitor (see page 42).
Be sure to close the viewfinder after use.
Adjusting the Diopter
Adjust the diopter according to your eyesight
when the picture in the viewfinder is not clear.
1 Lift up the viewfinder.
2 Hold down the Lock button and set the
Power switch to CAMERA.
3 While looking through the viewfinder,
turn the Diopter adjustment until the
indicators in the viewfinder are clearly
visible.
Diopter
adjustment
2 Hold down the Lock button
and set the Power switch to
CAMERA or VCR.
A picture is displayed in the
viewfinder.