Sharp VL-WD450U Camcorder User Manual


 
56
Advanced Features
Windbreak
The windbreak function allows you to reduce
annoying noise from strong winds when
recording.
1 Set the camcorder to TAPE-CAMERA
mode.
2 Press the MENU/DISPLAY button until
the menu screen appears.
3 Select U, then press r on the Opera-
tion button. Select WIND (1), then
press r (2).
OFF
ON
AUDIO MODE
W
IND
ZOOM MIC
AUDIO SET
4 Press d or y to select ON, then
press e.
ON
W
IND
5 Press the MENU/DISPLAY button to
turn off the menu screen.
To cancel Windbreak
Select OFF in step 4 above.
Note:
Keep the windbreak function off during normal
recording. If it is left on, the recorded audio may
sound somewhat muffled when played back.
Setting the Confirmation
Sounds
A confirmation sound is made when you turn
on or off the Power switch, press the REC
START/STOP button, or perform other desig-
nated operations. Use the procedure below to
change the type of sound or to turn off the
confirmation sounds altogether.
Type of Confirmation Sound
Settings
CHIME: A chiming sound is made.
BEEP: An electronic beeping sound is made.
OFF: No confirmation sound is made.
1 Press the MENU/DISPLAY button until
the menu screen appears.
2 Select I, then press r on the
Operation button. Select SOUND (1),
then press r (2).
BEEP
OFF
CHIME
REMOTE
SOUND
TIME CODE
TC OUT
DEMO MOD E
LANGUAGE
OTHERS
3 Press d or y to select the desired
sound setting, then press e.
BEEP
SOUND
4 Press the MENU/DISPLAY button to
turn off the menu screen.
Note:
If OFF is selected, the sound effect of a
camera shutter closing in PHOTO SHOT mode
and CARD-CAMERA mode will also be turned
off.