Sharp VL-WD450U Camcorder User Manual


 
41
Useful Features
Camera Recording
Useful Features
Using P-IN-P mode
1 Perform the steps in Selecting a still
recording effect to select P-IN-P (see
page 40).
2 In Recording Standby mode, press the
STILL button.
An inset image of the subject is
displayed.
AU
AU
TO
TO
AUTO
To change the position of the inset
image, press e or r on the Opera-
tion button. The inset image moves as
shown below.
AUTOAUTO
AUTOAUTO
3 Adjust the Power Zoom control to frame
the inset subject.
4 Press y to freeze the inset
image.
Note:
Pressing y, e or r while
the inset image is frozen cancels
the still image.
5 Press the REC START/
STOP button.
The still image of the
subject will be recorded.
In CARD-CAMERA mode,
press the STILL button,
instead of the REC START/
STOP button.
To pause recording on tape
Press the REC START/STOP button.
To turn off the inset image
Press the MENU/DISPLAY button.
To cancel still recording effects
Select OFF in step 5 of Selecting a still
recording effect.
AUTOAUTO
Note:
P-IN-P mode cannot be used together with the
following functions.
Mosaic picture effect
DIS
16:9
Brighter mode (`) of the gain-up function
Digital zoom