Filter
Top Products
n..n = number of data bytes
(DAB) = data byte - 8-bit data byte
Key Type Value Description
FrameNumber I frame number
-1 = gain frame
0 = reference frame
1 to n. ‘n’ is the size of the frame buffer.
default = current frame
Replace B default = false
true = replace
If the camera or the camera resolution
stored in the file do not match the current
configuration then the LBA-PC must replace
the current camera or change the
resolution before the frame can be loaded.
Either of these changes results in clearing
the frame buffer (i.e. all current frames are
discarded). If the pixel scale stored in the
file does not match the current pixel scale
then the pixel scale will be set to the value
in the file. If the
energy
calibration stored
in the file does not match the current
energy
calibration then the
energy
calibration will be set to the value in the
file.
false = do not replace
If the camera or camera resolution do not
match then the LBA-PC will issue an error
and the frame is not loaded. The pixel
scale and
energy
calibration values will not
be changed.
A.5.4.7 FST - frame status information
:FST <configuration>
1,3
:FST? [FrameNumber=f]
Returns:
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
251
FST <configuration>
2