Filter
Top Products
Operation Using the RM-BR300 Remote Control Unit
Storing the Camera Settings in Memory – Presetting Feature
40
Storing the Camera
Settings in Memory
– Presetting Feature
Up to sixteen combinations of settings (sixteen
positions), including camera position, zooming,
focusing, and backlighting, can be stored in the memory
of the camera using the RM-BR300 Remote Control
Unit.
The number of positions that can be stored depends on
the camera model. You can store up to six positions on
a BRC-300/300P camera.
For details of the camera settings to be preset, see
“Presetting Items” on page 59.
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Press the CAMERA button to select the camera
whose settings you want to preset.
3
Adjust the position, zooming, focusing and
backlighting of the camera. (See page 36 to 39.)
4
Press the SHIFT button to select the function of
POSITION 1 to 8 buttons, if necessary.
To store in positions 1 to 8, press the SHIFT button
so that the upper indicator lights. The POSITION
1 to 8 buttons can be used for positions 1 to 8.
To store in positions 9 to 16, press the SHIFT button
so that the lower indicator lights. The POSITION 1
to 8 buttons can be used for positions 9 to 16.
5
While holding down the PRESET button, press any
of the POSITION buttons, 1 to 8, in which you want
to store the settings.
The settings are stored in the memory of the
camera.
The pressed button flashes during storing. Flashing
stops when storing is completed.
To recall the stored settings
Select the function of the POSITION 1 to 8 buttons
using the SHIFT button, if necessary. Press any of the
POSITION buttons, 1 to 8, in which you have stored the
settings.
To cancel the preset memory
Select the function of the POSITION 1 to 8 buttons
using the SHIFT button, if necessary. While holding
down the RESET button, press the POSITION button
from which you want to cancel the settings.
The pressed button flashes during canceling of the
settings. Flashing stops when the settings have been
canceled.
Notes
• When the power is turned on, the camera starts with
the settings stored in POSITION 1.
• If you want to retain the previous pan and tilt positions
when the power is turned off and turned on again, store
those positions in POSITION 1.
• When you are storing or canceling the settings in one
POSITION, you cannot call up, store or cancel the
settings in another POSITION.
1
1
9
LOCK
MODE
VALUE
RESET
MENU
PRESET
SHIFT
L/R
DIRECTION
PANEL
LIGHT
BLACK
LIGHT
PAN-TILT
RESET
ONE PUSH
AWB
POWER
AUTO
MANUAL
AUTO
ONE PUSH
AF
234567
2
10
STD REV
3
11
4
POSITION
CAMERA
12
5
13
6
14
7
15
8
16
R
– +
BRIGHT
B
– +
FOCUS
NEAR FAR
24
51
RESET
SHIFT
for positions 1 to 8
for positions 9 to 16
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
RESET
PRESET
Press a POSITION button.
While holding down
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
RESET
PRESET
Press a POSITION button.
While holding down