Filter
Top Products
44
GB
Symptom
Some images in
the image list
are not
displayed or not
printed even if
they are
displayed.
Cause/Solutions
cIf the image is displayed but cannot be
printed, the file used for printing is
damaged.
cIf there are no images stored in the
memory card or an external device, the
“No image file” message appears.
cIf an image is not compatible with DCF
(Design rule for Camera File system), it
may not be printed with the printer even
if it is displayed on the PC monitor.
cIf the mark shown on the left is
displayed, the image may be a JPEG file
created with your computer, or the
thumbnail data is not contained.
Select the mark and press ENTER to
display its image preview. If an image is
displayed, you can print the image. If the
same mark is displayed again, the image
is of incompatible file format and you
cannot print it with the printer.
cIf the mark shown on the left is
displayed, the image is of compatible file
format but its thumbnail data or the data
itself cannot be opened.
Select the mark and press ENTER to
display its image preview. If an image is
displayed, you can print the image. If the
same mark is displayed again, you
cannot print it with the printer.
cThe printer can display, save, delete or
handle up to 9 999 image files. If there
are more than 9 999 images stored in a
memory card or an external device, use
the PC or PictBridge mode to display and
handle the remaining images.
Check
• Are thumbnail images
displayed in the image
list?
• Does the mark
displayed below
appear in the image
list?
• Was the image created
on your PC?
• Does the mark
displayed below
appear in the image
list?
• Are there more than
9 999 images saved in
the memory card or an
external device?