Sony HSR-1 Security Camera User Manual


 
Chapter 4 Menu Operations
Chapter 4 Menu Operations 4-3
4 Highlight (or display) the item to be set by
pressing the V or v key, then press the b key to
move to the next layer.
For the item for which the current setting is
displayed on the layer in step 3, the setting
parameters are now displayed.
Monitor screen
SETUP MENU
REC FUNCTION MENU
NORMAL REC : MODE 1
M
*
REC MODE 1
REC MODE 2
REC MODE 3
REC MODE 4
REC MODE 5
An asterisk (
*
) indicates the value is the default setting.
Character display
>>Mode 1
The other items have the subsequent layers.
Highlight (or display) the item to be set by
pressing the V or v key, then press the b key to
move to the next layer.
Pressing the b key with an item that has no
subsequent layer is ignored.
5 Press the V or v key to select the setting.
6 Press the SET key.
The message “NOW SAVING” is displayed, and
the setting is registered in nonvolatile memory.
The setting procedure may differ with the items
incorporated in special setting displays. See the
corresponding paragraph for the setting procedures.
To restore to the previous setting
Before pressing the SET key, press the MENU key.
The message “ABORT !” is displayed, and the
previous setting is restored.
Note
If power is cut off while data are being written into
nonvolatile memory, the setting data may be lost. Do
not turn off the power to the recorder while the
message “NOW SAVING” is being displayed.
Current settings
Setting the Menu Items
1 Press the MENU key.
The recorder enters Menu mode.
Monitor screen
SETUP MENU
IMAGE CONTROL MENU m
INDICATION CONTROL MENU
REC FUNCTION MENU
FUNCTION CONTROL MENU
REMOTE CONTROL MENU
MAINTENANCE MENU
TIME ADJUST
MENU INITIALIZE
MENU GRADE : ENH
LANGUAGE : ENG
Character display
Image Menu
The item selected when you left the menu the last
time is highlighted on the monitor and displayed
on the character display on the front panel.
2 Highlight (or display) the item to be set by
pressing the V or v key.
Pressing the v key selects the item on the next line
and pressing the V key selects the previous line of
the same layer.
3 Press the b key.
The recorder enters the next layer of the selected
item.
Monitor screen
SETUP MENU
REC FUNCTION MENU
M NORMAL REC : MODE 1
TIMER REC
ALARM REC
REPEAT REC : OFF
CONTINUOUS REC
1)
: OFF
SETTING OF REC MODE
Character display
>Rec Mode
1) HSR-1/1P only