Sony HSR-1 Security Camera User Manual


 
Chapter 5 Connections and Preparations
5-16 Chapter 5 Connections and Preparations
3 To change the password, enter a new password
twice in the same manner as when you set the
previous one, and press the SET key.
To delete the password, press the RESET key
without entering any number.
If you forget the password
Consult your Sony dealer.
To releasing the key lock using
Passwords
Press the LOCK key in key lock status (the LOCK
lamp is lit).
When the password(s) have been set, a message
requesting a password appears.
PASSWORD
PLEASE INPUT PASSWORD
– – – –
SHIFT : M
INPUT: NUM KEY
ABORT : LOCK KEY
DATA SET: SET KEY
By entering a password, you can enable some or all of
the locked keys.
To release the key lock of Level 1 only
Enter the password of Level 1 and press the SET key.
The LOCK lamp slowly flashes
1)
and the functions
specified for Level 1 are enabled.
To release the key lock of Levels 1 and 2
Enter the password of Level 2 and press the SET key.
The LOCK lamp promptly flashes
1)
and the functions
specified for Levels 1 and 2 are enabled.
To release the key lock completely (Levels 1
to 3)
Enter the password of Level 3 and press the SET key.
The LOCK lamp goes dark, and all the recorder’s
functions are enabled.
To activate the key lock again
When you press the LOCK key after releasing the key
lock of any level, the LOCK lamp lights and the
recorder enters lock status again,
1) If no password has been specified for the higher level(s),
the LOCK lamp goes out, and all the recorder’s functions
are enabled.
..........................................................................................................................................................................................................
Settings