Filter
Top Products
Chapter 5 Connections and Preparations
5-10 Chapter 5 Connections and Preparations
Settings
Repeat steps 4 and 5 for all the divisions.
The same camera can be assigned to multiple
divisions.
When setting the structure in a dividing mode that
has multiple pages, the setting display for the
subsequent page will appear by pressing the b key
in the last (lower right) division. To return to the
pervious page, press the B key in the first (upper
left) division.
To set the selected division to a blank (no
display) division
Set to NO.
If all the divisions of a page are set to “NO, ” that
page will be skipped when monitoring. Similarly,
if all the divisions of a dividing structure are set to
“NO,” that dividing structure will be skipped when
monitoring.
6 When the settings are completed, press the SET
key.
A message “NOW SAVING” is displayed, and the
settings are stored in nonvolatile memory.
The Image Control Menu is restored.
To restore the previous setting
Before pressing the SET key, press the MENU key.
The message “ABORT !” is displayed, and the
previous setting is restored.
To set the playback display structures
Use PLAY DISP STRUCTURE (Play Disp) of the
Image Control menu for making the setting.
1 Highlight IMAGE CONTROL MENU (Image
Menu) of the top menu by pressing the V or v key,
then press the b key.
The Image Control menu (page 4-6) is displayed.
2 Highlight PLAY DISP STRUCTURE (Play Disp)
by pressing the V or v key, then press the b key.
The menu shifts to playback display structure
setting.
SETUP MENU
IMAGE CONTROL MENU
PLAY DISP STRUCTURE
4 DIVISION
6 DIVISION
7 DIVISION
8 DIVISION
9 DIVISION
10 DIVISION
13 DIVISION
16 DIVISION
3 Highlight the desired division mode by pressing
the V or v key, then press the b key.
The setting display of the selected division mode
appears on the monitor screen.
Example: 8-Division mode
CAM 2
CAM 1
CAM 3
CAM 4
CAM 5 CAM 6 CAM 7
(MON)
(PB)
(MON)
(MON)
(MON) (MON) (MON)
NO
1 page
4 Select the division to be set by pressing the b or B
key.
Each time you press either of the keys, the next
division is selected, and the indication for the
selected division flash.
5 Select the camera to be monitored in the selected
division by pressing the V or v key.
Each time you press either of the keys, the camera
numbers of the connected cameras and NO are
cyclically selected.
To assign a playback camera
Set CAM 1(PB) to CAM 16(PB).
You can also specify the camera number by
pressing the corresponding number key.