Sony HSR-2 Security Camera User Manual


 
Chapter 1 Overview
Chapter 1 Overview 1-7
3 CURSOR V/v keys
Used to move within a single layer in Menu mode.
While monitoring a picture, you can switch screen
division configurations with these keys.
4 SET/YES key
Press this key to register your menu settings.
This key also functions as the YES answer key for
YES/NO questions.
5 RESET/NO key
In normal operation mode, press this key to reset the
tape counter value in the indication window.
In menu mode, this key functions as the NO answer
key for YES/NO questions.
3 Search operation block
1 TIME SEARCH key
Press this key to locate a picture from a specific date
and time (Time Search). You can also locate the
recording end on a tape with this key (Rec End
Search).
For details, see “Time Search” on page 2-10 and “Rec End
Search” on page 3-14.
2 ALARM SEARCH key
To display the list of alarm recordings on a tape and
transport the tape to the point of the specified
recording.
For details, see “Alarm Search” on page 3-9.
4 Indication window
1 ALARM indication
Lights when alarm recording is on.
For details, see “Alarm Recording” on page 3-4.
2 CONT (continuous) indication
Lights when continuous recording is set to ON on the
HSR-1/1P. It stays lit on the HSR-2/2P.
For details, see “Changing the Cassette During Recording”
on page 3-15.
3 REPEAT indication
Lights during repeat recording.
For details, see “Repeat Recording” on page 3-7.
4 TIMER indication
Lights when the timer recording is on.
For details, see “Timer Recording” on page 3-1.
5 Tape remaining indication
Lights when a cassette is loaded, showing the
recording capacity remaining on the tape.
The remaining segment(s) will flash when the
remaining recording capacity becomes less than 3
minutes based on the calculation from the Tape Length
setting.
For the Tape Length setting, see “Setting the Recording
Modes” on page 5-12.
TIME
SEARCH
ALARM
SEARCH
2ALARM SEARCH key
1TIME SEARCH key
ALARM CONT REPEAT TIMER
S
TIME MODE
E
1ALARM indication
2CONT indication
3REPEAT indication
4TIMER indication
5Tape remaining
indication
6Character display
7Time data
indication