Filter
Top Products
Chapter 3 Convenient Recording/Playback Functions
3-12 Chapter 3 Convenient Recording/Playback Functions
The high-speed playback function permits you to
check the data on the tape at a higher speed than with
normal high-speed search.
1)
Using this function, you can check an entire 270-
minute tape in 270 minutes.
To execute high-speed playback
1 Insert a recorded cassette.
2 Press the PLAY key while holding down the
FRAME 7 key.
To stop high-speed playback
Press the STOP key.
Notes
• If you switch the operation from high-speed playback
to variable-speed playback by pressing either
FRAME key, subsequent playback may not be
correctly performed. To precisely check the data on
the tape, first stop the high-speed playback, then use
normal playback mode.
• High-speed playback in the reverse direction is not
possible.
High-Speed Playback
1) Normal high-speed search means the high-speed search
executed by pressing the F FWD key in normal playback
mode or executed using the SHUTTLE dial of the
SVRM-100A.
..........................................................................................................................................................................................................