Filter
Top Products
92
Q (Warning indicators pertaining to
the tape)
Slow flashing:
• There is less than 5 minutes remaining
on the tape.
• No cassette is inserted.*
• The write-protect tab on the cassette is
set to lock (p. 95).*
Fast flashing:
• The tape has run out.*
Z (Eject cassette warning)*
Slow flashing:
• The write-protect tab on the cassette is
set to lock (p. 95).
Fast flashing:
• Moisture condensation has occurred
(p. 101).
• The self-diagnosis display code is
displayed (p. 91).
- (Warning indicator pertaining to
image deletion)*
• The image is protected (p. 74).
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo”)*
• The write-protect tab on the “Memory
Stick Duo” is set to lock (p. 96).
(Warning indicator pertaining to
camera-shake warning)
• The camcorder is unsteady, so camera-
shake easily occurs. Hold the
camcorder steady with both hands and
shoot the image. However, note that the
camera-shake warning indicator does
not disappear.
* You hear a melody when the warning indicators
appear on the screen (p. 64).
If messages appear on the screen, follow the
instructions.
z Tips
• When is displayed, the message can be
turned into by touching . Touch
to display the message again.
x Moisture condensation
%Z Moisture condensation. Eject
the cassette (p. 101)
% Moisture condensation. Turn off
for 1H. (p. 101)
x Cassette/Tape
Z Reinsert the cassette. (p. 26)
• Check if the cassette is damaged.
QZ The tape is locked - check the
tab. (p. 95)
x “Memory Stick Duo”
Reinsert the Memory Stick.
(p. 26)
• Reinsert the “Memory Stick Duo” a
few times. If even then the indicator
flashes, the “Memory Stick Duo” might
be damaged. Try with another
“Memory Stick Duo.”
This Memory Stick is not
formatted correctly.
• Check the format, then format the
“Memory Stick Duo” as necessary
(p. 53, 96).
Description of warning
messages
Warning indicators and messages (Continued)