Filter
Top Products
51
HVR-V1E/V1P
2-887-521-12(1)
L:\SONY\PV\CX91030\1130insatuPDF\2887521121_GB\2887521111HVRV1UVIN\01GB05BAS.
fm
Recording/Playback
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
This is convenient during playback of the
latest scene check.
1 Assign [REC REVIEW] to one of
the ASSIGN buttons in advance.
(p. 49).
2 Press the ASSIGN button
assigned to [REC REVIEW] during
standby mode.
The last 2 seconds (approx.) of the most
recently recorded scene are played back.
Then, your camcorder is set to standby.
b Note
• End search will not work correctly when there is
a blank section between recorded sections on
the tape.
1 Assign [END SEARCH] to one of
the ASSIGN button in
advance(p. 49).
2 Press the ASSIGN button to
which [END SEARCH] is
assigned.
The last scene of the most recent
recording played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
b Note
• The End search function fill not work correctly
when there is a blank section between recorded
sections on the tape.
You can let your camcorder to
automatically rewind the tape to the
beginning of the most recently recorded
scene, play back to the end of the scene,
then stop the playback.
1 Assign [LAST SCN RVW] to an
ASSIGN button (p. 49).
2 During standby, press the
ASSIGN button to which [LAST
SCN RVW] is assigned.
[LAST SCN RVW] will be executed.
b Note
• If the recording time of the movie is short,
[LAST SCN RVW] may not be executed
correctly.
Reviewing the most recently
recorded scenes (Rec review)
Searching for the last scene of
the most recent recording
(End search)
Playing back the most recently
recorded movies (Last scene
review)
Continued ,