Filter
Top Products
85
HVR-V1E/V1P
2-887-521-12(1)
L:\SONY\PV\CX91030\1130insatuPDF\2887521121_GB\2887521111HVRV1UVIN\01GB06MEN
.fm
Using the Menu
(TC/UB SET) menu
(TC PRESET/UB PRESET/TC LINK, etc.)
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 64 for details on selecting
menu items.
x PRESET
You can preset the time code.
1 Select [TC PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
2 Select [PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
3 Select the first 2 digits by turning the SEL/
PUSH EXEC dial, then press the dial. You
can set the time code between 00:00:00:00
and 23:59:59:29.
4 Set other digits by repeating step 3.
5 Select [OK] by turning the SEL/PUSH
EXEC dial, then press the dial.
x RESET
You can reset the time code (00:00:00:00).
Select [RESET] in step 1 of the
[PRESET].
x PRESET
You can preset the user bit.
1 Select [UB PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
2 Select [PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
3 Select the first 2 digits by turning the SEL/
PUSH EXEC dial, then press the dial.
4 Set other digits by repeating step 3.
5 Select [OK] by turning the SEL/PUSH
EXEC dial, then press the dial.
Press the MENU button t select the
(TC/UB SET) by turning the SEL/PUSH
EXEC dial.
TC PRESET
UB PRESET
x RESET
You can reset the time code (00:00:00:00).
Select [RESET] in step 1 of the
[PRESET].
You can select how the time code advances.
BREC RUN
Time code value advances only while
recording. Select this when making the
time code continuous at backspace editing.
FREE RUN
Time code value advances freely
regardless of the camcorder’s current
operation mode. Select this when adjusting
the discrepancy between time code value
and real time.
BREGENERATE
Select to make the time code continuous at
backspace editing. Regardless of the [TC
RUN] setting, the running mode is
automatically set to [REC RUN].
PRESET
Select when you do not want to make the
time code continuous at backspace editing.
You can synchronize the time codes of
multiple HVR-V1E/V1Ps.
This function is useful for editing movies
recorded by multiple camcorders.
1 Decide which camcorder will generate a
time code (main camcorder) and which
camcorder will receive that time code (sub
camcorder). Make sure a tape is loaded in
the main camcorder.
2 Set the POWER switches of the main and
sub camcorders to CAMERA.
3 Connect the main camcorder to the sub
camcorder with an i.LINK cable.
TC RUN
TC MAKE
TC LINK
Continued ,