Filter
Top Products
124
Recording superimposed images on a “Memory Stick” as a still
image
Before operation
Insert a “Memory Stick” recorded still images into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Press MEMORY MIX.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY+/– to select the image you want to superimpose.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
(4) Select the desired mode with the control button.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
(5) Press z on the control button.
The still image is superimposed on the moving image.
(6) Press b/B on the control button to adjust the effect.
M. CHROM – The color (blue) scheme of the area in the still image which is
to be swapped with a moving image
M. LUMI – The color (bright) scheme of the area in the still image which
is to be swapped with a moving image
C. CHROM – The color (blue) scheme of the area in the moving image
which is to be swapped with a still image
The fewer bars there are on the screen, the stronger the effect.
(7) Press PHOTO deeper to start recording.
The image displayed on the screen will be recorded on a “Memory Stick.”
Recording is complete when the bar scroll indicator disappears.
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX