Filter
Top Products
133
“Memory Stick” Operations
Erasing the program you have set
Erase OUT first and then IN from of the last program.
(1) Select and decide upon UNDO with the control button.
(2) Select and decide upon EXECUTE with the control button.
The last set program mark flashes, then the setting is canceled.
To cancel erasing
Select and decide upon RETURN with the control button in step 2.
Erasing all programs
(1) Select and decide upon VIDEO EDIT, then select and decide upon MEMORY
with the control button.
(2) Select and decide upon ERASE ALL, then select and decide upon EXECUTE
with the control button.
All the program marks flash, then the settings are canceled.
To cancel erasing all programs
Select and decide upon RETURN with the control button in step 2.
To cancel a program you have set
Press MENU.
The program is stored in memory until the tape is ejected.
Notes
•You cannot dub the titles, display indicators, or the contents of cassette memory.
•You cannot operate recording during the digital program editing on “Memory Stick”s.
•You cannot set IN or OUT on a blank portion of the tape.
•If there is a blank portion between IN and OUT on the tape, the total time code may
not be displayed correctly.
During making a program
If you eject the cassette, NOT READY appears on the screen. The program will be
erased.
If you set over the maximum recording time
The program mark changes to yellow, and OVER 15 SEC LIMIT appears when
IMAGE SIZE is set to 320 × 240, or OVER 60 SEC LIMIT appears when IMAGE SIZE is
set to 160 × 112. However, you can record up to the maximum recording time.
Performing the program (Dubbing a “Memory Stick”)
(1) Select and decide upon VIDEO EDIT in the menu settings, then select and
decide upon MEMORY with the control button.
(2) Select and decide upon START, then select and decide upon EXECUTE with
the control button.
Search for the beginning of the first program, then start dubbing.
The program mark flashes.
The SEARCH indicator appears during search, the EDITING indicator appears
during writing of data on your camcorder, and REC appears during dubbing
on the screen.
The PROGRAM indicator changes to light blue after dubbing is complete.
When the dubbing ends, your camcorder automatically stops.
To stop dubbing during editing
Press x using the video operation buttons.
The program you made is recorded on a “Memory Stick” up to the place where you
pressed x.
Recording edited pictures as a moving picture
– Digital program editing (on “Memory Stick”s)