Filter
Top Products
95
Editing
To erase the label you have made
Select and decide upon [C] with the control button in step 4. The last character is erased.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If you set the write-protect tab of the tape to lock
You cannot label a cassette. Slide the write-protect tab to release the write protection.
If the tape has too many index signals
You may not be able to label a cassette because the memory is full. In this case, delete
data you do not need.
If you have superimposed titles in the cassette
When the label is displayed, up to four titles also appear.
When the “-----” indicator has fewer than 10 spaces
The cassette memory is full.
The “-----” indicates the number of characters you can select for the label.
To erase the character
Press [C]. The last character is erased.
To enter a space
Select [ Z& ? ! ], then select the blank part.
Erasing all the data in cassette memory
You can erase all the data in cassette memory at once.
(1) Set the POWER switch to CAMERA or VCR.
(2) Press MENU, then select and decide upon ERASE ALL in
with the control
button (p. 96).
(3) Select and decide upon OK with the control button. OK changes to EXECUTE.
(4) Select and decide upon EXECUTE with the control button. ERASING flashes
on the screen. When all the data is erased, COMPLETE is displayed.
To cancel deleting
Select and decide upon RETURN with the control button in step 4.
Labeling a cassette