Filter
Top Products
163
Troubleshooting
Warning indicators and messages
100-0001 Warning indicator as to file
Slow flashing:
•The file is corrupted.
•The file is unreadable.
•You are trying to carry out MEMORY MIX
function on moving picture (p. 121).
C:21:00 Self-diagnosis display (p. 162).
E The battery is dead or nearly dead
Slow flashing:
•The battery is nearly dead.
Depending on the operating conditions,
environment and battery condition, the E
indicator may flash, even if there are
approximately five to 10 minutes remaining.
Fast flashing:
•The battery is dead (p. 13).
% Moisture condensation has occurred*
Fast flashing:
•Eject the cassette, turn off your camcorder,
and leave it for about one hour with the
cassette compartment open (p. 172).
Warning indicator as to cassette
memory*
Slow flashing:
•No tape with cassette memory is inserted
(p. 165).
Warning indicator as to “Memory
Stick”*
Slow flashing:
•No “Memory Stick” is inserted.
Fast flashing:
•The “Memory Stick” is not readable with
your camcorder (p. 104).
•The image cannot be recorded on “Memory
Stick” (p. 118).
If indicators and messages appear on the screen, check the following:
See the page in parentheses “( )” for more information.
Warning indicators
C:21:00100–0001
Warning indicator as to “Memory Stick”
formatting*
Fast flashing:
•“Memory Stick” is not formatted correctly
(p. 100).
•The “Memory Stick” data is corrupted
(p. 104).
Q Warning indicator as to tape
Slow flashing:
•The tape is near the end.
•No tape is inserted.*
•The write-protect tab on the cassette is out
(red) (p. 19).*
Fast flashing:
•The tape has run out.*
Z You need to eject the cassette*
Slow flashing:
•The write-protect tab on the cassette is out
(red) (p. 19).
Fast flashing:
•Moisture condensation has occurred (p. 172).
•The tape has run out.
•The self-diagnosis display function is
activated (p. 162).
- The image is protected*
Slow flashing:
•The image is protected (p. 150).
Warning indicator as to the flash
Slow flashing:
•During charging
Fast flashing:
•The self-diagnosis display function is
activated (p. 162).*
•There is something wrong with the built-in
flash or the external flash (optional).
* You hear the melody or beep sound.