Filter
Top Products
110
The flash does not work.
• You cannot record with the flash with:
– During recording movies
–[SUPER NS]
– [COLOR SLOW S]
– [D. EFFECT]
– [ BURST]
– The conversion lens (optional) attached
• Even if auto flash or (Auto redeye reduction) is selected, you cannot use the internal flash
with:
– NightShot
– [SPOTLIGHT], [SUNSET&MOON] or [LANDSCAPE] in [PROGRAM AE]
– [EXPOSURE]
– [SPOT METER]
The external flash (optional) does not work.
• The power of the flash is not turned on, or the flash is not attached correctly.
The actual recording time for movie is less than the expected approximate
recording time.
• When you record an object that moves fast, the time available for recording may shorten (p.17,
77).
The recording stops.
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• Moisture condensation has occurred with the disc. Turn off your camcorder and leave it about
1 hour in a cool place (p.135).
There is a time difference between the point where you press START/STOP and
the point that the recorded movie starts/stops.
• On your camcorder, there may be a slight time difference between the point where you press
START/STOP and the actual point that recording movie starts/stops. This is not a malfunction.
The movie aspect ratio cannot be changed.
• The aspect ratio of a DVD+RW disc cannot be changed. Format the disc again to change the
movie aspect ratio.
Troubleshooting (continued)