Filter
Top Products
46
To record in mirror mode............ qd
Open the LCD screen qd 90 degrees to the
camcorder (1), then rotate it 180 degrees to
the lens side (2).
• A mirror-image of the subject appears on the LCD
screen, but the picture will be normal when
recorded.
To add special effects ............... 7
See PICT. APPLI. on page 74.
To use a tripod........................ qj
Attach the tripod (optional: the length of the
screw must be less than 5.5 mm ) to the tripod
receptacle qj using a tripod screw.
To attach the shoulder belt ......... qh
Attach the shoulder belt (optional) with your
camcorder to the hook for the shoulder belt.
To use Playback zoom............26
You can magnify pictures from about 1.1 to
5 times the original size.
Magnification can be adjusted with the power
zoom lever 2 or the zoom buttons 6 on
the LCD frame.
1 Play back the picture you want to
magnify.
2 Magnify the picture with T (Telephoto).
A frame appears on the LCD screen.
3 Touch the portion that you want to display
in the center of the LCD screen.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch [END].
• You cannot change the zoom speed with the zoom
buttons 6 on the LCD frame.
To play back a series of
still images (Slide show)........... 7
Touch on the still image playback
screen.
The slide show begins from the selected
image.
Touch to stop the slide show. To restart,
touch again.
• You can touch to set continuous slide show
playback. The default setting is [ON] (continuous
playback).
• You cannot operate playback zoom during slide
show.
Playback
Functions used for recording/playback, etc. (continued)