Filter
Top Products
79
Using the Setup items
DATE/TIME
1Date
2Time
CAMERA DATA
3SteadyShot off
4Exposure
5White balance
6Gain
7Shutter speed
8Aperture value
9Exposure value
• appears for an image recorded using a flash.
• The data code is displayed on the TV screen if
you connect your camcorder to a TV.
• The indicator toggles through the following
sequences as you press DATA CODE on the
Remote Commander: DATE/TIME t
CAMERA DATA t OFF (no indication).
• Depending on the disc condition, bars [--:--:--]
appear.
• The setting returns to [OFF] when you set the
POWER switch to OFF (CHG) for more than 12
hours.
You can select the number of thumbnails that
appear on the VISUAL INDEX screen.
Thumbnail Glossary (p.142)
BZOOM LINK
Change the number of thumbnails (6 or 12)
with the zoom lever on your camcorder.*
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
* You can operate with the zoom buttons on the
LCD frame or on the Remote Commander.
Because the default setting is [ON], when
you select tab on the VISUAL INDEX
screen the first 5 seconds of each movie
displayed on the screen are played back in
sequence.
• Set to [OFF] to conserve battery power.
• Playback for the movie stops after repeating 5
times.
BAUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
– When your camcorder recognizes the
remaining disc capacity with the POWER
switch set to (Movie).
– When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch to (Movie).
– When the recordable time for movies is
less than 5 minutes.
– When you start recording from the line
input.
ON
Always displays the remaining disc
indicator.
Movie
Still image
DISPLAY
MOVIE PB
REMAINING