Filter
Top Products
78
The recorded picture will not be affected even
when you change the setting.
x LCD BRIGHT
You can adjust the brightness of the LCD
screen.
1 Adjust the brightness with / .
2 Touch .
x LCD BL LEVEL
You can adjust the brightness of the LCD
screen’s backlight.
BNORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
• When you use the AC Adaptor as the power
source, [BRIGHT] is automatically selected for
the setting.
• When you select [BRIGHT], battery life is
slightly reduced during recording.
x LCD COLOR
You can adjust the color on the LCD screen
with
/ .
x VF B.LIGHT
You can adjust the brightness of the
viewfinder.
BNORMAL
Standard brightness.
BRIGHT
Brightens the viewfinder screen.
• When you connect your camcorder to AC
Adaptor, [BRIGHT] is automatically selected for
the setting.
• When you select [BRIGHT], battery life is
slightly reduced during recording.
x VF WIDE DISP
You can select how a 16:9 (wide) aspect ratio
picture appears in the viewfinder.
BLETTER BOX
Normal setting (standard type of screen)
SQUEZE (Squeeze)
Expands the picture vertically if black bands
at the top and bottom in 16:9 (wide) aspect
ratio are undesirable.
• When you can set the POWER switch to
(Still), [VF WIDE DISP] does not appear.
See page 52.
You can select data transfer speed used to
transfer data to your computer.
BAUTO
Sends data by switching automatically
between the Hi-Speed USB (USB 2.0) and
the speed corresponding to USB 1.1 (full
speed transfer).
FULL SPEED
Sends data corresponding to USB 1.1 (full
speed transfer).
You can check the information recorded
automatically (data code) during playback.
BOFF
Data code is not displayed.
DATE/TIME
Displays the date and time of recorded
images.
CAMERA DATA
Displays the camera setting data of recorded
images.
LCD/VF SET
Low intensity High intensity
TV TYPE
USB SPEED
DATA CODE
STANDARD SET (continued)