Filter
Top Products
72
You can select the maximum zoom level in
case you want to zoom to a level greater than
10×(the default setting) while recording on
a disc or “Memory Stick Duo.” Note that the
image quality decreases when you are using
the digital zoom.
BOFF
Up to 10 × zoom is performed optically.
20 ×
Up to 10 × zoom is performed optically, and
after that up to 20 × zoom is performed
digitally.
120 ×
Up to 10 × zoom is performed optically, and
after that, up to 120 × zoom is performed
digitally.
You can record pictures using
[STEADYSHOT] (the default setting is
[ON]). Set [STEADYSHOT] to [OFF] ( )
when using a tripod or the conversion lens
(optional).
DIGITAL ZOOM
STEADYSHOT
The right side of the bar shows the digital
zooming factor. The zooming zone appears
when you select the zooming level.
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 64 for details on selecting
setup items.
You can record several still images one after
another by pressing PHOTO.
BOFF
Select this when not recording continuously.
NORMAL ( )
Records still images continuously at
approximately 0.5 seconds intervals. The
numbers of the maximum recordable
images are as follows:
3.0M ( ) : 3 images
1.9M ( ) : 4 images
VGA (0.3M) ( ) : 21 images
2.3M ( ) : 3 images
EXP. BRKTG ( )
Records 3 images consecutively with
different exposures at approximately 0.5
second intervals. You can compare the 3
images and select an image recorded at the
best exposure.
• The flash will not function during continuous
recording.
• The maximum number of images will be recorded
in the self-timer mode or when you are operating
with the Remote Commander.
• You may not be able to record continuous images
up to the maximum number depending on the
image size and the remaining capacity of the disc
or “Memory Stick Duo.”
• [EXP.BRKTG] will not function when there is
space remaining on the disc or “Memory Stick
Duo” for less than 3 images.
• It takes longer to record continuous images to the
disc compared to normal recording. Record the
next still image after the scroll bar indicator
( ) and the ACCESS lamp turns off.
STILL SET
Settings for still images
(BURST/QUALITY/IMAGE SIZE, etc.)
BURST
CAMERA SET (continued)