Filter
Top Products
Playback
38
DCR-IP1E
3-084-862-12(1)
E:\CX4800\revision2\SDL\updated1_final_Delivery\EU\GB.FR\3084862121DCR-IP1ECEE\01GB05PLAY.fm
master:Right
Playback
Viewing movies
recorded on a tape
Make sure you have a recorded cassette
inserted into your camcorder.
You can use the Remote Commander for
some of the following operations.
When you want to play back the recorded
picture on your TV, see page 45.
1 Open the LCD panel.
2 Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
3 Touch (rewind) to go to the point
you want to view.
4 Touch (play) to start playback.
To adjust the volume
1
Touch .
2 Touch [VOLUME].
If the item is not displayed on the screen,
touch / . If you cannot find it, touch
MENU, then select it from the
(STANDARD SET) menu.
3 Adjust the volume with (decrease)
/ (increase), then touch .
To stop playback
Touch (stop).
To pause
Touch (pause) during playback. Touch it
again to restart the playback.
Your camcorder automatically enters the stop
mode when the pause mode continues for more
than 5 minutes.
To fast forward or rewind
Touch (fast forward) or (rewind) in
stop mode.
Indicators displayed while playing back
the tape
A Remaining battery time
B Tape transport indicator
C Tape counter (hours:minutes:seconds)
D Personal Menu button
E Video operation buttons
When you stop playing back the tape with
the “Memory Stick Duo” inserted,
(stop) changes to (“Memory Stick
Duo” playback selector button).
POWER
switch
Slide the POWER switch down
while pressing the green button.
0:00:00
m
P-MENU
60min
60min
0:00:00
N
P-MENU
60min
13
5
4
2