Filter
Top Products
Using the Menu
E:\CX4800\revision2\SDL\updated1_final_Delivery\EU\GB.FR\3084862121DCR-IP1ECEE\01GB06MENU.fm
master:Right
Using the Menu
67
DCR-IP1E
3-084-862-12(1)
Using the
(STANDARD SET)
menu — USB-CAMERA, etc.
You can select the items listed below on the
STANDARD SET menu. To select these
items, see “Selecting Menu items” on p. 49.
The default settings are marked with G. The
settings you can adjust vary depending on the
mode of the POWER switch of your
camcorder. Only the items that can be
operated in the selected mode are displayed.
VOLUME
See pages 38, 40 for details.
LCD SET
If you adjust the following items, the recorded pictures will not be affected.
LCD BRIGHT
See page 16 for details.
LCD BL LEVEL
You can adjust the brightness of the backlight for the LCD screen.
b Notes
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
LCD COLOR
1 Touch / to adjust the color on the LCD screen.
2 Touch .
3 Touch .
The recorded picture will not be affected by this setting.
0:00:00
STANDARD SET
VOLUME
LCD SET
VIDEO INPUT
.
.
.
OK
60min
GNORMAL Standard brightness.
BRIGHT Select to brighten the LCD screen.
–
+
Low intensity
High intensity
,continued