Filter
Top Products
Customizing Your Camcorder
Customizing Your Camcorder
51
Using the (LCD
SET) menu
– LCD B.L./LCD
COLOR, etc.
You can select the items listed below in the
LCD SET menu. To select these items, see
“Changing the menu settings” (p. 41).
The default settings are marked with G. The
settings you can adjust vary depending on the
power mode of your camcorder.
The screen
shows the items you can operate at the moment.
Unavailable items will be grayed out.
LCD BRIGHT
See page 16 for details.
LCD B.L.
You can adjust the brightness of the LCD screen’s backlight. The recorded picture
will not be affected by this setting.
b Notes
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
LCD COLOR
Turn the SEL/PUSH EXEC dial to adjust the color on the LCD screen. The
recorded picture will not be affected by this setting.
LCD SET
LCD BRIGHT
LCD B. L.
LCD COLOR
[
MENU
]
: END
GBRT NORMAL Standard brightness.
BRIGHT Select to brighten the LCD screen.
Low intensity
High intensity