Filter
Top Products
Dubbing/Editing
Dubbing/Editing
63
10Point the infrared ray emitter of your
camcorder towards the remote sensor
on your VCR, from about 30 cm (12
in.) away, with no obstructions.
11Set the VCR to recording pause.
12Turn the SEL/PUSH EXEC dial to
select [IR TEST], then press the dial.
13Turn the SEL/PUSH EXEC dial to
select [EXECUTE], then press the dial.
Recording starts on your VCR when the
setting is correct. [COMPLETE] appears
when the [IR SETUP] code test is finished.
Go on to the next step.
When recording fails to start, select another
[IR SETUP] code and try again.
14Turn the SEL/PUSH EXEC dial to
select [ RETURN], then press the
dial.
[IR SETUP] code list
The following [IR SETUP] codes are recorded
on your camcorder by default. (It is set at “3” as
the default setting.)
Remote sensor
VCR
Infrared ray
emitter
Manufacturing
company
[IR SETUP] code
Sony 1, 2, 3, 4, 5, 6
Admiral (M. Wards) 89
Aiwa 47, 54, 80
Akai 49, 51
Audio Dynamic 21, 35
Bell&Howell (M. Wards) 36
Broksonic 21, 70, 82
Canon 77, 78
Citizen 47
Craig 47, 73
Curtis Mathis 8, 77, 80
Daewoo 26, 40, 77
DBX 21, 33, 35
Dimensia 8
Emerson 26, 48, 59, 70, 80, 81, 82
Fisher 36, 37, 44, 45
Funai 80
General Electric 8, 32*, 77, 94*, 101
Goldstar/LG 47
GO VIDEO 71
Hitachi 8, 42, 78
HQ 40
Instant Replay 77, 78
JC Penny 8, 21, 33, 35, 36, 42, 77
JVC 12, 13, 14, 21, 33, 35
Kenwood 21, 33, 35, 47
LXI (Sears) 36, 37, 42, 44, 45, 47,
49, 80
Magnavox 17, 77, 78, 83
Marantz 21, 33, 35
Marta 47
Memorex 37, 77
Minolta 8, 42
Mitsubishi/MGA 22, 23, 24, 28, 29
,continued