Filter
Top Products
Using with your computer
Using with your computer
77
(and “First Step Guide,” if installed by steps
11-12) appear on the desktop.
15Remove the CD-ROM from the disc
drive of your computer.
If you have any questions about Picture
Package
Contact information is listed on page 78.
Installing on a Macintosh
computer
1 Confirm that your camcorder is not
connected to the computer.
2 Turn on the computer.
Close all applications running on the
computer before installing the software.
3 Place the CD-ROM in the disc drive of
your computer.
4 Double-click CD-ROM icon.
5 Copy “FirstStepGuide.pdf,” stored in
the desired language in the
[FirstStepGuide] folder, to your
computer.
6 Copy [IMXINST.SIT] in the [MAC]
folder of the CD-ROM to a folder of
your choice.
7 Double-click [IMXINST.SIT] in the
folder it was copied to.
8 Double-click the unzipped
[ImageMixerVCD2_Install].
9 When the user acceptance screen is
displayed, enter your name and
password.
The installation of ImageMixer VCD2
starts.
For details on how to use ImageMixer VCD2,
refer to the software’s on-line help.