D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB08TS.FM
master:Right
Troubleshooting
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
Troubleshooting
103
Troubleshooting
Troubleshooting
If you run into any problem using your
camcorder, use the following table to
troubleshoot the problem. If the problem
persists, remove the power source and
contact your Sony dealer.
If “C:ss:ss” is displayed on the LCD
screen or the viewfinder, the self-diagnosis
display function is activated. See page 110
for details.
Overall operations
Symptom Cause and/or Corrective Actions
The power does not turn on. • The battery pack is discharged, running low, or not attached to the
camcorder.
cAttach a charged battery pack to the camcorder. (p.14)
cUse the AC Adaptor to connect to the wall outlet. (p. 17)
The camcorder does not operate even
when the power is set to on.
cDisconnect the AC Adaptor from a wall outlet or remove the battery
pack, then reconnect it after about 1 minute. If the functions still do not
work, press the RESET button using a sharp-pointed object. (If you press
the RESET button, all settings including the clock setting (except the
Personal Menu items) are reset.)
The supplied Remote Commander
does not function.
cSet [REMOTE CTRL] on the (STANDARD SET) menu to [ON].
(p. 80)
cInsert a battery into the battery holder with the + – polarities correctly
matching the + – marks. If this still does not solve the problem, insert a
new battery since the battery is dead. (p. 129)
cRemove any obstructions between the Remote Commander and the
remote sensor.
,continued