Sony DCR-TRV460 Camcorder User Manual


 
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB05PLAY.fm
master:Right
Playback
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
Playback
57
Locating a scene on a
tape for playback
Searching quickly for a desired
scene – Zero set memory
1 During playback, press ZERO SET
MEMORY on the Remote
Commander at the point you want to
locate later on.
The tape counter is reset to “0:00:00” and
appears on the screen.
If the tape counter is not displayed, press
DISPLAY on the Remote Commander.
2 Press (stop) when you want to
stop playback.
3 Press m REW.
The tape stops automatically when the tape
counter reaches “0:00:00.”
4 Press PLAY.
The playback starts from the point
designated “0:00:00” on the tape counter.
To cancel the operation
Press ZERO SET MEMORY on the Remote
Commander again.
b Notes
There may be a discrepancy of several seconds
between the time code and the tape counter.
Zero set memory will not function correctly if there
is a blank section between recorded sections on the
tape.
For DCR-TRV460:
The zero set memory function does not work with
tapes recorded on other devices in the Hi8 /
standard 8 mm system.
Searching for a scene by date of
recording – Date search
You can locate the point where the recording
date changes.
1 Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
2 Press SEARCH M. on the Remote
Commander repeatedly to select
[DATE SEARCH].
PLAY
ZERO SET MEMORY
DISPLAY
STOP
m REW
0:00:0060min
P-MENU
20
. / >
SEARCH M.
STOP
,continued