Sony DCR-TRV460 Camcorder User Manual


 
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Recording
38
When using the Super NightShot plus or Color Slow
Shutter function, the shutter speed of your
camcorder changes depending on the brightness.
The motion of the picture may slow down at this
time.
Adjust the focus manually when it is hard to focus
automatically.
Do not cover the infrared port with your fingers or
other objects. Remove the conversion lens (optional)
if it is attached.
Depending on the shooting conditions or
circumstances, colors may not be reproduced
properly.
z Tip
If you record subjects in complete darkness, setting
[NS LIGHT] to [ON] on the menu is recommended.
The maximum shooting distance using the
NightShot Light is about 3 m (10 feet).
(The default setting is [ON])
If you record subjects in dark places (such as night
scene or in moonlight), set [NS LIGHT] to [OFF] on
the menu. You can make image color deeper (p. 62).
Adjusting the focus
The focus is adjusted automatically in the
default setting.
Adjusting the focus for an off-
center subject – SPOT FOCUS
You can select and adjust the focal point to
aim it at a subject not located in the center of
the screen.
1 Touch during recording or in
the standby mode.
2 Touch [SPOT FOCUS].
If the item is not displayed on the screen,
touch / . If you cannot find it, touch
[MENU], and select it from the
(CAMERA SET) menu.
3 Touch the subject for which you want
to adjust the focus on the screen.
[SPOT FOCUS] flashes while the camera is
adjusting the focus.
9 appears.
4 Touch [END].
To adjust the focus automatically
Follow steps 1 and 2, then touch [AUTO] in step
3. Or set [FOCUS] to [AUTO] (p. 39).
0:00:00
ENDAUTO
SPOT FOCUS STBY
0:00:00
ENDAUTO
SPOT FOCUS STBY