Filter
Top Products
63
Advanced operations
You can record a tape from another VCR or a TV program from a TV that has audio/video
outputs. Connect the camcorder to the VCR or TV.
(1) While pressing the small green button on the POWER switch, set it to VTR and set
DISPLAY to LCD in the menu system.
(2) Press REC r and the button on the right together at the point where you want to start
recording.
In recording and the recording pause mode, S VIDEO and AUDIO/VIDEO jacks
automatically work as input jacks.
If your VCR or TV has an S video jack, connect using the S video cable (not supplied) [a] to
obtain a high quality picture.
If your TV or VCR is a monaural type, connect the yellow plug of the A/V connecting cable
for video to the TV or VCR. Connect only the white or red plug for audio to the TV or VCR.
If you connect the white plug, the sound is L (left) signal. If you connect the red plug, the
sound is R (right) signal.
If you are going to connect the camcorder using the S video cable (not supplied) [a] , you do
not need to connect the yellow (video) plug of the A/V connecting cable [b] .
Note on using the S video connecting cable
If the S video plug is not provided on your TV or VCR, do not connect the S video cable (not
supplied) to the camcorder. Pictures will not appear.
Note on the recording sound
The dual sound cannot be recorded in this camcorder.
To stop recording
Press π.
Recording from a VCR or TV
AUDIO/VIDEO
S VIDEO
S VIDEO
OUT
AUDIO/VIDEO OUT
(not supplied)
S VIDEO
VIDEO
AUDIO
OUT
[a]
[b]
1 2
POWER
V
T
R
C
A
M
E
R
A
O
F
F
REC