Filter
Top Products
92
Identifying the parts
To watch the demonstration
You can watch a brief demonstration of pictures with special effects. If the demonstration
appears when you turn on the camcorder for the first time, exit the demo mode to use your
camcorder.
To enter demo mode
(1)Eject the cassette and set the POWER switch to VTR.
(2)While holding down ·, set the POWER switch to CAMERA. The demonstration starts.
The demonstration stops when you insert the cassette. NIGHTSHOT should be set to ON
to start demonstration.
Note that once you enter demo mode, this mode is retained as long as the vanadium
rechargeable battery is in place. Therefore, demonstration starts automatically 10 minutes
later every time you set the POWER switch to CAMERA, and after you eject the cassette.
To exit demo mode
(1)Set the POWER switch to VTR.
(2)While holding down π, set the POWER switch to CAMERA.
Note on demo mode
When you set NIGHTSHOT to ON in the menu system, NIGHTSHOT indicator appears in
the viewfinder or on the LCD screen. At this time, you cannot select DEMO MODE in the
menu system.