Filter
Top Products
2-95
Programming the Scanner
Pause Duration
This parameter inserts a pause at any point in the data transmission. Pauses are set by
scanning a two-digit number (i.e. two bar codes), and are measured in 0.1 second intervals.
For example, scanning bar codes “0” and “1” inserts a 0.1 second pause; “0” and “5” gives
you a 0.5 second delay. Numeric bar codes begin on page 2-120. If you make an error or
wish to change your selection, scan
DATA FORMAT CANCEL
on page 2-96.
Pause Duration