Filter
Top Products
2-124
P 300STD/FZY/PRO Scanner Product Reference Guide
Macro PDF Transmit / Decode Mode Symbols
Select only one of the four options below for handling the decoding of Macro PDF.
!
Buffer All Symbols / Transmit Macro PDF When Complete:
This activates
transmission of all decode data from an entire Macro PDF sequence. Transmission
does not occur until the entire Macro PDF sequence is scanned and decoded. This is
the default option.
If the decode data exceeds the limit of the space available in RAM, there is no
transmission because the entire sequence has not been scanned, and an error occurs.
Use the parameter Flush Macro PDF Buffer to purge the buffer.
!
Transmit Any Symbol in Set / No Particular Order
: This causes transmission of data
from each Macro PDF417 symbol as decoded, whether it is in sequential order or
not. Up to 1024 Macro PDF bar codes may be transmitted.
!
Scan in Sequence Only / Transmit in Sequence Without Buffering
: This causes
transmission of data from each symbol within the Macro PDF sequence as decoded,
provided the Macro PDF symbols are scanned in order. If you do not scan the
symbols in order, an error occurs. Up to 1024 Macro PDF bar codes may be
transmitted.
!
Buffer Scans Out of Order / Transmit Scans in Order
: When enabled, decode data
from each symbol within the Macro PDF sequence is transmitted when decoded,
provided that the Macro PDF symbols are scanned in order. Decode data from
symbols out of order in the Macro PDF sequence is buffered. If the decode data
exceeds the limit of the space available in RAM, there is no transmission because the
entire sequence has not been scanned, and an error occurs. Use the parameter Flush
Macro PDF Buffer to purge the buffer.