Filter
Top Products
1-15
Getting Started
Beeper Indications
Table 1-1. Beeper Indicatio ns
Beeper Sequence Indication
Standard Use
Short high tone A bar code symbol was decoded (if decode beeper is
enabled).
Low tone, followed by short high tone A PDF417 bar code symbol was decoded (if decode
beeper is enabled).
4 Beeps - long low tone A transmission error has been detected in a scanned
symbol. The data is ignored. This occurs if a unit is not
properly configured. Check option settings.
5 Beeps - low tone Convert or format error.
Low/high/low tone ADF transmit error.
High/high/high/low tone RS-232 receive error.
Parameter Menu Scanning
Short high tone Correct entry scanned or correct menu sequence
performed.
Low/high tone Input error, incorrect bar code or “Cancel” scanned,
wrong entry, incorrect bar code programming sequence;
remain in program mode.
High/low tone Keyboard parameter selected. Enter value using bar code
keypad.
High/low/high/low tone Successful program exit with change in the parameter
setting.