Filter
Top Products
1-3
Getting Started
Figure 1-1. Installing the Cable
Switching Cables
Different cables are required for different hosts. To change the scanner cable:
1. Turn the cable counter-clockwise to unlock.
2. Pull the cable out of the receptacle on the bottom of the scanner.
3. Insert a new cable in the receptacle. Press the cable into the receptacle and twist to
the right.
Note:
Do not pull the trigger while installing a cable on the scanner.
Connecting Power
If your host does not provide power to the scanner, you will need to connect external power
to the scanner.
1. Connect the interface cable to the bottom of the scanner, as described in
Installing
the Cable
.
2. Connect the DC cable right-angle connector into the power port on the interface
cable. Plug the other end of the DC cable into the power supply.
3. Connect the AC line cord into the power supply. Plug the other end into a wall outlet.