Filter
Top Products
1-14
P 300STD/FZY/PRO Scanner Product Reference Guide
Scan Stand Operation
Scan Stand operation allows hands-free scanning on the P 300FZY and P 300PRO. When the
scanner is placed in the stand, the scan pattern begins to blink on the surface below. The red
LED lights to indicate scanning activity.
To scan, present the symbol in the path of the scan pattern, but no more than 7” away. Make
sure the scan pattern extends at 3/4 inch beyond the symbol’s edges. When the symbol is
properly oriented, the scan pattern expands vertically to cover the symbol. The LED lights
green and a short, high-toned beep sounds to indicate successful decode.
After a successful decode, remove the symbol from the scan path. If the symbol does not
decode, or if the pattern does not expand, remove the symbol from the scan path and try
again. Make sure the bar code is on a clean, white, non-reflective surface.